6 Factors to Consider Before Buying Resin Traps in 2020

6 Factors to Consider Before Buying Resin Traps in 2020

July 7, 2020 0 By Patrick Fletcher

Due to the increasing population and pollution, the water streams are continuously getting contaminated. It makes water unfit for drinking and other purposes like washing clothes, industrial use, cooking, etc.

Purified and healthy water is a basic necessity for us to survive. It is necessary equipment during the water treatment process. In the following write-up, we will discuss certain factors before purchasing resin traps for water treatment. It is an essential piece of equipment, which should be durable enough to keep other devices safe from any damage. Before discussing crucial factors, we will discuss the resin trap in detail, its benefits, and the installation process.

Overview of Resin Trap

Source: fluidfiltrationmfg.com

It is a compact device, which is installed in the backwash lines and service outlets. It helps in keeping the ion exchange resin, activated carbon, or another purification thing that does not separate from the water treatment device. This equipment is available in two materials, i.e., plastic and stainless steel.

Why is Resin Trap an Important Device for Water Treatment?

In industries, the use of powdered, granular, or crystalline purification ingredients is used commonly. The distribution systems get collapsed in the case of chemical reactions, change in flow, thermal damage, and much more. In this way, the downstream RO systems, filters, pumps, tanks, etc., get destroyed due to contamination.

It is essential to protect the distribution system for further losses. When we use purifying ingredients, the resin traps help in preventing the loss of carbon or other things. It protects costly water treatment equipment and other beneficial resin beads. There is no scope of environmental damage if you have a good-quality of product installed in your RO systems.

Where Can You Install the Effective Resin Trap Filters?

Source: fluidfiltrationmfg.com

This product can be used in the outlets of purifying devices like sand filters, demineralizers, softeners, carbon filters, DI tanks, polishers, and much more. Many industries use this device in the backwash lines for preventing the wastage of ion exchange as well as carbon filters. There are high chances of losing these expensive ingredients in case of a change in temperature and flow.

The outlets act as a protective barrier to capture the particles of size. Make sure that you install good quality and durable resin trap so that it does not wear out quickly. It should not corrode and can withstand powerful chemical reactions.

Essential Factors that are Must Consider While Buying Resin Trap

1. Durability

It is essential to get a durable resin trap with a long lifespan and high robustness. There should be no risks of any failure like underdrain, lateral or strainer, etc. while installing. The construction material should be sturdy so that it can control the flow of purifying ingredients.

Make sure that it could not separate these ingredients from other water treatment equipment. The main aim is to prevent contamination of water and protect the distribution systems.

2. Anti-Corrosive

The device should be made up of anti-corrosive material, i.e., hard to rust in the presence of harmful chemicals and other thermal reactions. At the time of water treatment, the resin trap can come in contact with harmful purification ingredients. If you buy a cheap and bad-quality product, then there are chances of more damage. You need to replace the product again and again whenever it gets damaged.

3. Design

The design of the filters should be good enough that it can prevent the particles from flowing away. It should withstand temperature and chemical reactions, without getting to wear out easily. The device should automatically start working at the time of any failure to collect the media.

It should be designed in such a way that it can easily protect the downstream pumps and other devices. For example, a resin trap is installed in a poultry plant, and after shutdown, it separated the processed chicken easily.

Source: blog.reskem.com

4. Material

Many companies manufacture this product in two materials, i.e., plastic and stainless steel. The steel product is more durable, anti-brittle, and difficult to rust. On the other hand, a plastic-made resin trap can be used where there is the involvement of less purifying ingredients or chemical reactions.

If we talk about cost, then stainless steel product is comparatively expensive than the plastic part. You can buy according to your needs and your business requirements. If you have a small water treatment machine, then you can consider the plastic resin trap.

5. Size

This product is available in different sizes and weights. The length ranges from two to four inches, and you can purchase any one of them according to your needs. The flow rate is also different, i.e., 100, 150, and 250. If you have small water treatment equipment, then go for the smallest resin trap. The size of the product depends on the size of your distribution system. Check the appropriate size and get one for purifying or separation of contamination.

6. Installation

Make sure that the device is easy to install. You may need professional help, but the installation process should be easy and not time-consuming. There is a blowdown valve that helps in cleaning the trap and capturing the media. There are three-end connections, i.e., flanged, socket, or threaded.

It should be installed properly. Remember that a resin trap with a high flowing rate and less pressure-loss can clean the trap with pressure, less than 2.0 Psig. It can be complicated to install the device yourself in the water treatment equipment.

The Bottom Line

Source: cadar.ltd.uk

Resin trap is an effective product to separate expensive media from getting wasted. It is an essential piece of equipment used in the water treatment process. It should be durable and need to install carefully. There are certain factors that you must consider while buying this product.

A bad-quality resin trap can affect the purification process because it is easy to corrode due to chemical reactions and changes in temperature. It is a must to invest in the right product and get what is required for your purification system. Choose the right material, size, and quality of the resin trap. Read more on ilmap.com for buying best resin traps for preventing leakage of expensive purifying ingredients.